Best Siding Nailers Reviews

Bostitch N66C-1 Siding Nailer with Aluminum Housing
Made in USA
Drives wire weld and plastic inserted coil nails
Adjustable depth guide sets nails to desired depths quickly and conveniently
Hitachi NV65AH2 Coil Siding Nailer
Brand New Tool Only (No Retail Packaging)
Selective actuation switch allows for either sequential or contact nailing
Side-load, tilt-bottom magazine for fast and easy reloads
Porter-Cable FN250C Finish Nailer for Siding
Maintenance free motor designed to deliver long life
Tool-free jam release mechanism, drive depth adjustment and exhaust adjustment
Internal PISTON catch for consistent max power on every shot

Best siding nailers

As time passed by, we have developed new tools to help us built and improve our homes. I think constructors and DIYers are the most grateful for the technological advancement. Nowadays, things are simple to make and remake. You do not need so much time and so much energy anymore. All you need is the right tools. Experience may be a key factor, but since speed is something we all want these days, the best tools will always work at a faster rate. For example, you will not be hammering a nail when you can have one of the best siding nailers, will you?

A siding nailer is a wonderful piece of equipment. I know that seems a little bit soft for a power tool, but we can save so much time and energy with its help that most people prefer it to the traditional hammer. It is very easy to understand why.

Types of siding nailers

As you can expect, there is more than one kind of siding nailers. Actually, there are two of them, but they each come with its pros and cons. At the end of the day, your choice is a matter of preference and convenience, but you should at least be informed.

Pneumatic siding nailers

Most siding nailers are pneumatic. You could go as far as saying that this is the basic kind. DIYers prefer it because it is inexpensive and uses an air compressor as a power source. So, the advantages are that it is cheap, does not weight much, and it is very convenient to use. They usually come with quick open nose pieces that will help users remove jammed or bent nails very fast. The downside to pneumatic siding nails is that you cannot use one without an air compressor. While the nailer is cheap, the air compressor is not, so you see my point.

Electric siding nailers

For some people, an electric siding nailer may seem more convenient to use because it uses electricity instead of an air compressor. Using one will cut the cost of the latter, which may make a big difference for some. As for pros, electric siding nailers require minimal to no maintenance. Apart from oiling the machine once in a while, there is little to do. The fact that you do not have to drag an air compressor all the while you are working is another plus, which makes this kind more suitable for fast jobs. Noise is also an advantage. Electric siding nailers do not make as much noise as the pneumatic ones. As for cons, there are not many. However, some people may think that electric siding nailers are a bit heavy, which can be a drag sometimes, especially if you have to work somewhere high. Other than that, they are amazing.

What to consider when looking for the best siding nailer?

Before making a purchase, make sure that you have all the information at hand. You need to make an informed decision, which is why I compiled a list of what you need to look at. Here it is:

  • Design – the reason why I put this first is that comfort is important when you work with power tools. You need to be able to hold the nailer comfortably and securely. Otherwise, accidents can happen, and accidents involving nailers are not mild. Also, if you need to hold a siding nailer for an extended period of time, you need to be able to have a secure grip. It goes without saying that an ergonomic handle is the best choice you can possibly make.
  • Exhaust – the best siding nailer has an excellent exhaust I say that because when you are using it, especially in dusty areas, the last thing you need is all that dust and debris in your face. The exhaust must deviate the dust away from the user.
  • Dry fire lock out – when the nailer is left without nails, there is no need for it to fire. It can lead to accidents, and nobody wants that. However, there are models that come with a dry fire lockout which will prevent that from happening. This feature will allow you to see how many nails there are left in the magazine, but only if the system is open. The point is that you need a safety feature, and this is it.
  • Selectable trigger – is you want to go for the best siding nailer, you should choose one that features a selectable trigger. That means you will be able to switch from sequential mode to contact firing mode and the other way around. That means the tool will be easier to use, and more reliable.
  • Gauge – a siding nailer will not support more nail gauges, which is why you need to take your pick. You can choose from 15 and 16 gauge nails. The latter means that the nail has a smaller diameter and will be able to penetrate a thin piece of wood effortlessly. This is the most commonly used gauge. 15 gauge nails, on the other hand, are larger in diameter, and it is not as familiar. However, looking at trends, it is becoming more and more popular.
  • Angled or straight – when looking at designs, you need to decide whether you need a straight siding nailer or an angled siding nailer. What is certain is that the angled ones are able to fit in smaller spaces. Other than that, there is no much difference.
  • Balance and weight – this is a matter of construction, and the best siding nailers will always be lightweight and very well balanced. After all, you do not need sore muscles after a few hours of work, do you?

Tips on how to use a siding nailer

Not everyone has experience with a nail gun, which is why I think that there are a few valuable tips you should always remember:

  1. The best siding nailer usually has a safety nose that you should depress before engaging the trigger. That is a beneficial safety feature that can prevent a lot of mishaps.
  2. Look for models with anti-marring tips. They are made of rubber, and their purpose is to prevent the nailer from leaving marks on the surface of the wood you are working on.
  3. Never use the siding nailer without appropriate equipment. Use a helmet, reinforced boots, and do not forget about the gloves.

The most important thing to remember is that you need to be safe at all times. Nail gun injuries are often severe, and nobody needs that kind of trouble. As long as you wear safety equipment and you use the tool with care, you should be alright. But do not treat this power tool lightly.

What are the best siding nailers?

There are a few reputable brands out there that manufacture high-quality nailers. As long as you know what you want, you should have no trouble finding what you are looking for. However, if you need some help, below you will see three excellent siding nailers that will do a fantastic job. All you need to do is pick one.

Bostitch N66C-1 Siding Nailer with Aluminum Housing

Click here to buy it on Amazon

Bostitch is one of those reputable manufacturers I was telling you about above. They make high-quality products at reasonable prices, so you will have an easy time purchasing this model. It is made in the USA, and it is one of the most popular nailers in this price range. It drives both wired weld and plastic inserted coil nails.

The Bostitch N66C-1 features an adjustable depth guide that will insert the nails to the desired depth. It is easy and convenient, and you and I both know that it is a helpful feature. The exhaust is entirely adjustable so that you do not get dust or debris on your face. The adjustment can be made without any tools whatsoever.

As for design, this siding nailer is made of aluminum. That makes the tool not only lightweight but extremely durable as well. It weighs just 9.5 pounds. A soft rubber foot prevents any damage to the wood you are working on. The Bostitch N66C-1 is air-powered, and with a driving power of 515 inches per pound, it can set 1-1/4-inch to 2-1/2-inch nails. The magazine can accommodate 350 nails so that you can do a lot of work in one load.

Hitachi NV65AH2 Coil Siding Nailer

Click here to buy it on Amazon

Hitachi is yet another manufacturer that provides quality at the best possible prices. It is a world-renowned company that has been mass producing power tools for a long time, so their experience weighs a lot in the manufacture of their products. The NV65AH2 is the perfect example of that, and I am sure that if you buy this model, you will be more than satisfied.

The NV65AH2 features a selective switch that will allow you to switch from sequential mode to contact nailing. All you have to do is turn a switch. It is that simple. The reload system is very convenient. The magazine is side-load, tilt-bottom, which ensures fast and effortless reloads. You can use both wire and plastic sheet collated nails, and as for size, this tool is made for 2-1/2-inch nails.

The Hitachi NV65AH2 is very lightweight. It weighs only 4.8 pounds, which means it will be very easy to maneuver. You can also adjust the depth of drive without any tools. The air deflector is adjustable so that it directs the exhaust away from you, and the no-mar cap will protect the surface of the wood you are working on. There is also a plastic shield that deflects the wire collation for added safety. Overall, this is an excellent product, safe, and reliable. The nailer uses an air compressor as a power source.

Porter-Cable FN250C Finish Nailer for Siding

Click here to buy it on Amazon

Last but not least, Porter-Cable is one of those manufacturers that do not fail to satisfy your needs. They also manufacture products with an excellent price-quality ratio. The FN250C model is one of the most popular purchases online, which is why it made the list. It comes with a durable and sturdy motor that is maintenance free. That means you get to enjoy it for a very long time.

The FN250C features a tool-free jam release mechanism that will make things easier for you when there is a bent nail on the way. You can adjust both the drive depth and the exhaust for more convenience. The internal piston catch is designed to provide maximum power with every single shot.

As for the nail size, this siding nailer is made to drive 16 gauge nails from 1 inch to 2-1/2 inches in length. It uses an air compressor as a power source, but it is effortless to use. It weighs a bit more than the previous two models, with 10.1 pounds, but the difference is unnoticeable. Overall, this product is worth the investment.

My recommendation

It is always tough to pick the best from three excellent choices, but it must be done. As far as I am concerned, I think that the Hitachi NV65AH2 Coil Siding Nailer is one of the best siding nailers you can buy. Why? Because it has all the right features, but what this one has and the other two do not is the weight. With only 4.8 pounds, you should be able to handle this nailer all day long and not feel a thing. I think that it differentiates it from the other two. I strongly recommend it.

Conclusion

Technological advancement is incredible in any field, so why would construction be any different? The best siding nailer has the potential of becoming every constructor’s or DIYer’s best friend. It does an excellent job, but the more important aspect is that it does it fast. After all, that is what we are looking for in power tools: reliability, safety, and high-speed. Click here to buy on Amazon

External Links

Related Posts